Paint Inspection Gauge

BEVS1707 PIG is using destructive method to measure coating thickness, containing single and multipl

Request Quotation

    Applied Scientific Instruments Co., Ltd.
    1526, 1526/3 Sukhumvit 48/3, Sukhumvit Rd., Prakanong, Klong Toey, Bangkok 10260 Thailand

    บริษัท แอพพลายด์ ไซแอนทิฟิค อินสตรูเม้นท์ส จำกัด
    1526, 1526/3 ซอย สุขุมวิท 48/3 ถนน สุขุมวิท แขวงพระโขนง เขตคลองเตย กรุงเทพ ฯ 10260

    Tel: +66 2 332 8179, 742 7035-6
    Fax: +66 2 332 8180
    Email: sales@asithailand.com

    Description

    Introduction: 

    BEVS1707 PIG is using destructive method to measure coating thickness, containing single and multiple coats, applied on all of substrates, e.g.:aluminum, iron, plastic, wood, concrete, glass etc.

    Using Principle:

    A cut is made on the test surface with a V-shaped tool.The coating thickness can be measured with the built-in microscope underthe LED light.

    Standard:

    ASTM D4138, DIN 50986, ISO 2808

    Technical Specification:

    Cutter Cut Angle Range(μm) D Factor(μm)
    No.1 45° 20-1800 20
    No.2 63.4° 10-900 10
    No.3 84.3° 2-180 2


    Measurement Principle:

    Operating Steps:

    Step Illustration Description
    1     Prepare the inspecting area
    2  Draw a line with the marker pen on the surface
    3     Cut the coating vertically and make sure it is lacerated
    4     Read the graduation-scale with the microscope to attain thickness

     

    Order Information:

    BEVS 1707 Paint Inspection Gauge, including 3 x cutters (No. 1, 2 and 3 each), 1 x battery, 1 x marker pen and 1 x carrying case

    Accessories:

    BEVS 1707/P/010             Cutter No.1
    BEVS 1707/P/020             Cutter No.2
    BEVS 1707/P/030             Cutter No.3

    Downloads

    Paint Inspection Gauge.pdf