Paint Inspection Gauge

BEVS1707 PIG is using destructive method to measure coating thickness, containing single and multipl

Request Quotation

Applied Scientific Instruments Co., Ltd.
1526, 1526/3 Sukhumvit 48/3, Sukhumvit Rd., Prakanong, Klong Toey, Bangkok 10260 Thailand

บริษัท แอพพลายด์ ไซแอนทิฟิค อินสตรูเม้นท์ส จำกัด
1526, 1526/3 ซอย สุขุมวิท 48/3 ถนน สุขุมวิท แขวงพระโขนง เขตคลองเตย กรุงเทพ ฯ 10260

Tel: +66 2 332 8179, 742 7035-6
Fax: +66 2 332 8180
Email: sales@asithailand.com

Description

Introduction: 

BEVS1707 PIG is using destructive method to measure coating thickness, containing single and multiple coats, applied on all of substrates, e.g.:aluminum, iron, plastic, wood, concrete, glass etc.

Using Principle:

A cut is made on the test surface with a V-shaped tool.The coating thickness can be measured with the built-in microscope underthe LED light.

Standard:

ASTM D4138, DIN 50986, ISO 2808

Technical Specification:

Cutter Cut Angle Range(μm) D Factor(μm)
No.1 45° 20-1800 20
No.2 63.4° 10-900 10
No.3 84.3° 2-180 2


Measurement Principle:

Operating Steps:

Step Illustration Description
1     Prepare the inspecting area
2  Draw a line with the marker pen on the surface
3     Cut the coating vertically and make sure it is lacerated
4     Read the graduation-scale with the microscope to attain thickness

 

Order Information:

BEVS 1707 Paint Inspection Gauge, including 3 x cutters (No. 1, 2 and 3 each), 1 x battery, 1 x marker pen and 1 x carrying case

Accessories:

BEVS 1707/P/010             Cutter No.1
BEVS 1707/P/020             Cutter No.2
BEVS 1707/P/030             Cutter No.3

Downloads

Paint Inspection Gauge.pdf