Specification
Maximum flow rate: 1670 l/hr
Maximum operating pressure: 50 bar
Pressure sensors: 0-50 bar
Mass balance range: 0-6kg
brands-for-woocommerce
domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init
action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /var/www/vhosts/asithailand.com/store.asithailand.com/wp-includes/functions.php on line 6114updraftplus
domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init
action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /var/www/vhosts/asithailand.com/store.asithailand.com/wp-includes/functions.php on line 6114brands-for-woocommerce
domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init
action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /var/www/vhosts/asithailand.com/store.asithailand.com/wp-includes/functions.php on line 6114The Armfield FT18-MkII is a small pilot-scale cross-flow filtration system designed to operate with a range of membrane module configurations. It can operate with as little as 5-10 litres of material but still give data that is useful for process scale-up.
It can be used over the full range of cross-flow filtration applications from microfiltration through to reverse osmosis. It is the perfect tool to use, following on from flat sheet membrane trials with the FT17 (Cross Flow Membrane Filtration System), for further process development and scale-up.
Maximum flow rate: 1670 l/hr
Maximum operating pressure: 50 bar
Pressure sensors: 0-50 bar
Mass balance range: 0-6kg
Dairy: Removal of microorganisms from milk and cheese brines, milk protein standardisation and concentration, whey demineralisation, whey protein fractionation, defatting of whey proteins, and filtration
Fermented foods: Clarification of wine, beer and vinegar, removal of alcohol from wine and beer, post-fermentation yeast recovery, wine lifting
Fruit juices: Clarification and concentration
Water and waste water purification, desalination, water softening
Concentration and purification of macromolecules, sterile filtration, viral clearance, cell separation, water purification
Degumming of vegetable oils
Filter housing: 316 stainless steel
Filter length: 0.5m
N° of channels: 1
Channel internal diameter: 7mm
Membrane area: 0.022m2
Available membranes:
Filter housing: 1812 (1.8” x 12”) 316 stainless steel sanitary housing
Generic module for use with female elements from different membrane manufacturers
Membrane area depends on element (max: 0.45m2)
The module can be used for MF, UF, NF and RO operations
Max operating pressure: 40 bar
Membrane housing: Polysulfone
Filter length: 0.46m
Fibre internal diameter: 1.1mm
Max operating pressure: 2.1-2.8 bar
Membrane area: 0.09m2
Available membranes:
Filter housing: 316 stainless steel
Filter length: 2 x 0.3m
Membrane area: 0.024m2
Max operating pressure: 40 bar (recommended)
Available membranes:
30-litre 316 stainless steel retentate vessel for recirculated product, complete with sensor to protect against dry running. Mass balance option for permeate flow rate measurement.
Electronic flow meter that measures the recirculation (retentate) flow rate
Must be ordered with FT18-MkII base unit
This module enables filtration pressure to be reversed for a period of time during processing in order to reduce fouling and thus enable extended operation between cleaning cycles
This module is compatible with the Ceramic (FT18-5) and Hollow Fibre (FT18-7) filter modules only
Must be ordered with FT18-MkII base unit
FT18-MkII-C: 380-415V/3ph/50Hz/10A
FT18-MkII-D: 208-220V/3ph/60Hz/20A
Towns water 10 l/min at 2 bar or equivalent flow recirculation chiller for lower temperatures
6 bar with minimal air consumption (required for FT18-50 option only)
Volume: 1.9m3
Gross weight: 300kg
Length: 0.72m
Width: 1.00m
Height: 1.50m
FT18-MkII-C: 380-415V/3ph/50Hz/10A
FT18-MkII-D: 208-220V/3ph/60Hz/20A
FT18-MkII-50-C: 380-415V/3ph/50Hz/10A (Includes digital instrumentation upgrade)
FT18-MkII-50-D: 208-220V/3ph/60Hz/20A (Includes digital instrumentation upgrade)
FT18-5: Ceramic Filter Module (option)
FT18-6: Spiral Wound Filter Module (option)
FT18-7: Hollow Fibre Filter Module (option)
FT18-8: Tubular Filter Module (option)
FT18-20: Vessel (option)
FT18-50-1: Backpulsing/Backflushing (option)
ARMBUS-LCD-15.6-SS: Touchscreen system (option)