brands-for-woocommerce domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /var/www/vhosts/asithailand.com/store.asithailand.com/wp-includes/functions.php on line 6114updraftplus domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /var/www/vhosts/asithailand.com/store.asithailand.com/wp-includes/functions.php on line 6114brands-for-woocommerce domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /var/www/vhosts/asithailand.com/store.asithailand.com/wp-includes/functions.php on line 6114
The Brookfield FAST system has a rugged design with non-moving parts. It has been designed to perform day after day under the extreme demands in printing, coating and adhesive operations – with no maintenance. Utilizing a high frequency, micro-rotational core, which is unaffected by press vibration, this worry free system can measure and control the viscosity of your inks, coatings and adhesives from start to finish…allowing the operators to handle other press concerns.
FAST/MXTS SENSOR SPECIFICATIONS
| Measurement Type: | Torsionally oscillating probe |
| Measurement Range: | 1 to 3,000 (optional 12,000) cSt using an NIST traceable, Newtonian fluid measured at 25°C |
| Process Connections: | ¾” standard, (1, 2½” tri-clamp or 3A design, optional) |
| Repeatability: | ±1.0% of reading |
| Wetted Surfaces: | 316L stainless steel |
| Sensor O-Ring: | Isolast for probe Viton for chamber housing (EDPM or Kalrez®, optional) |
| Temperature (Fluid): | -4°F to 392°F (-20°C to 200°C) |
| Pressure Range: | Vacuum to 200 pig max., 400 psig option |
FMXTS TRANSMITTER SPECIFICATIONS
| Viscosity Range (cSt): (field selectable) |
0 to 10, 0 to 50, 0 to 100, 0 to 250, 0 to 500, 0 to 1000, 0 to 1500, 0 to 2000, 0 to 12500 |
| Analog Output (2): | 4-20 mA (non-isolated) CH1 = viscosity CH2 = temperature |
| Serial Port (2): | Port 1 = RS232, simple, read only Port 2 = ½ Duplex RS485, Modbus RTU driver |
| Electronics Packaging: | Wall mount, NEMA-4 (IP65), 8” x 8” x 6” (203 x 203 x 152mm) 32°F to 104°F (0°C to 40°C) |
| Interconnecting Cable: | 25 ft (7.6m) standard Optional: 50 ft (15.2m), 75 ft (22.8m) and 100 ft (30.4m) |
| Supply Voltage: | 18-30VDC or 115VAC/60 Hz or 230VAC/50 Hz (±10% max), power draw <1 amp |
Specifications subject to change without notice.
